考虑渗吸和驱替的致密油藏体积改造实验及多尺度模拟

李帅; 丁云宏; 孟迪; 卢拥军; 许江文

doi:10.13639/j.odpt.2016.05.025

高级检索

E-mail Alert

考虑渗吸和驱替的致密油藏体积改造实验及多尺度模拟

李帅, 丁云宏, 孟迪, 卢拥军, 许江文

文章导航 > 石油钻采工艺 > 2016 > 38(5): 678-683

李帅, 丁云宏, 孟迪, 卢拥军, 许江文. 考虑渗吸和驱替的致密油藏体积改造实验及多尺度模拟[J]. 石油钻采工艺, 2016, 38(5): 678-683. doi: 10.13639/j.odpt.2016.05.025

引用本文:

LI Shuai, DING Yunhong, MENG Di, LU Yongjun, XU Jiangwen. Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement[J]. Oil Drilling & Production Technology, 2016, 38(5): 678-683. doi: 10.13639/j.odpt.2016.05.025

Citation:

LI Shuai, DING Yunhong, MENG Di, LU Yongjun, XU Jiangwen. Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement[J]. Oil Drilling & Production Technology, 2016, 38(5): 678-683. doi: 10.13639/j.odpt.2016.05.025

考虑渗吸和驱替的致密油藏体积改造实验及多尺度模拟

doi: 10.13639/j.odpt.2016.05.025

1.
中国石油勘探开发研究院
2.
中国石油勘探开发研究院廊坊分院
3.
西南石油大学地球科学与技术学院
4.
中国石油新疆油田公司工程技术研究院

详细信息

中图分类号: TE348

Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement

1.
Research Institute of Petroleum Exploration and Development, CNPC, Beijing 100083, China
2.
Langfang Branch of Research Institute, Petroleum Exploration and Development, CNPC, Langfang Hebei 065007, China
3.
School of Geoscience and Technology, Southwest Petroleum University, Chengdu, Sichuan 610500, China
4.
Engineering Technology Research Institute, PetroChina Xinjiang Oilfield Company, Karamay, Xinjiang 834000, China

摘要: 矿场试验表明，压裂后不立即放喷，依靠焖井过程的驱替和渗吸可置换小孔隙内的原油，提高原油采出程度。为探索该过程机理，进行了实验和模拟研究。首先，带压渗吸实验，模拟裂缝壁面在驱替压差和毛管力共同作用下的渗吸行为，无因次时间中加入驱替项（Δp），对实验结果进行归一化处理；其次，建立基于CT 扫描的孔隙尺度模型，通过致密岩心采收率拟合，获得驱替、渗吸的相渗和毛管压力；最后，在油藏尺度，分别赋予基质和裂缝不同的相渗和毛管压力，模拟矿场实际油水流动。结果表明：带压渗吸采收率明显高于自发渗吸采收率，提高幅度10%~15%；无因次时间中加入驱替项，可对实验结果进行较好的归一化；调整微观孔隙结构如孔道/ 喉道半径、孔喉比、配位数等参数可以实现渗吸采收率的拟合；油藏尺度对基质/ 裂缝以及渗吸/ 驱替的划分，可准确反映开采初期含水率变化。
- 致密油藏 /
- 体积改造 /
- 渗吸 /
- 驱替 /
- 多尺度模拟
Abstract: TField experiences show, before prompt blowout after fracturing, soaking process can proceed to sweep the crude oil in minor pores through displacement and imbibition to enhance oil recovery. Tests and simulation have been conducted to analyze the mechanism in these processes: First of all, pressurized imbibition tests were conducted to simulate imbibition of fracture sidewalls under joint effects of differential displacement pressures and capillary force by adding displacement (Δp) in the dimensionless time. Relevant test results were processed through normalization; Secondly, models on pore scale were constructed based on CT scanning. By fitting with oil recovery in tight cores, relative permeability and capillary pressure of displacement and imbibition can be determined; In the final step, matrix and fractures were given different relative permeability and capillary pressures on field scale to simulate actual oil/ water flows in formation. Test results show: oil recovery of pressurized imbibition is significantly higher than that of spontaneous imbibition approximately by 10%~15%; By adding the displacement term in dimensionless time, better normalization of test results can be obtained; By adjusting microscopic pore structures, such as pore/pore throat radius, pore throat ratio, coordination number and other parameters, satisfactory matching between imbibition and oil recovery can be performed; Partition of matrix/fracture and imbibition/ displacement on field scale may accurately reflect changes in watercut in early development stages.
- tight oil reservoir /
- volumetric reconstruction /
- imbibition /
- displacement /
- multi-scale simulation

[1]	孙业恒, 殷代印, 刘凯. 致密油藏不同沉积岩人工裂缝导流能力实验 . 石油钻采工艺, 2021, 43(1): 104-109. doi: 10.13639/j.odpt.2021.01.016
[2]	任允鹏. 致密油藏长缝压裂直井基质-裂缝耦合流动模型 . 石油钻采工艺, 2020, 42(3): 334-339. doi: 10.13639/j.odpt.2020.03.014
[3]	张佩玉, 何海波, 蒋明, 王波, 向洪, 刘剑辉. 玉探1井致密油藏超深井压裂工艺 . 石油钻采工艺, 2020, 42(5): 642-646. doi: 10.13639/j.odpt.2020.05.020
[4]	刘俣含, 赵志成, 石善志, 何小东, 许冬进. 基于正交试验的致密油渗吸影响因素分析 . 石油钻采工艺, 2020, 42(2): 189-194. doi: 10.13639/j.odpt.2020.02.011
[5]	陶登海, 詹雪函, 高敬文, 郑翔频, 任丽双, 周洪涛. 三塘湖盆地马中致密油藏注水吞吐探索与实践 . 石油钻采工艺, 2018, 40(5): 614-619. doi: 10.13639/j.odpt.2018.05.013
[6]	刘佳, 杨胜来, 张楚汉, 魏建光, 甘俊奇, 刘忠华. 论齐成伟幂比方程作为致密油藏渗流本构方程 . 石油钻采工艺, 2017, 39(1): 112-118. doi: 10.13639/j.odpt.2017.01.022
[7]	杨树坤, 张博, 赵广渊, 李翔, 郭宏峰. 致密油藏热水驱增油机理定性分析及定量评价 . 石油钻采工艺, 2017, 39(4): 399-404. doi: 10.13639/j.odpt.2017.04.002
[8]	白晓虎, 庞鹏, 苏良银, 达引朋, 赵伯平, 吴甫让. AN 区块致密油藏低产水平井裂缝诊断方法 . 石油钻采工艺, 2016, 38(3): 365-371. doi: 10.13639/j.odpt.2016.03.017
[9]	任宗孝, 吴晓东, 金岗, 李华昌, 王瑞河, 马高强. 致密油藏体积压裂水平井半解析渗流模型 . 石油钻采工艺, 2016, 38(5): 633-639. doi: 10.13639/j.odpt.2016.05.017
[10]	白晓虎, 齐银, 陆红军, 段鹏辉, 顾燕凌, 吴甫让. 鄂尔多斯盆地致密油水平井体积压裂优化设计 . 石油钻采工艺, 2015, 37(4): 83-86. doi: 10.13639/j.odpt.2015.04.022
[11]	刘建伟, 张佩玉, 廖天彬, 刘海廷, 李天君, 滕强. 马58H 致密油藏水平井分段多簇射孔压裂技术 . 石油钻采工艺, 2015, 37(3): 88-92. doi: 10.13639/j.odpt.2015.03.020
[12]	黄鸿, 李俞静, 陈松平. 吉木萨尔地区致密油藏水平井优快钻井技术 . 石油钻采工艺, 2014, 36(4): 10-12. doi: 10.13639/j.odpt.2014.04.003
[13]	刘立峰, 冉启全, 王欣, 路军月, 袁晓红, 胡建新. 致密油藏水平井不稳定渗流压力分布 . 石油钻采工艺, 2014, 36(5): 65-68. doi: 10.13639/j.odpt.2014.05.016
[14]	张茂林, 万云祥, 谢飞龙, 张彦华, 段江. 吉木萨尔致密油钻井提速技术与实践 . 石油钻采工艺, 2014, 36(5): 18-21. doi: 10.13639/j.odpt.2014.05.005
[15]	赵振峰, 樊凤玲, 蒋建方, 王超菲, 廉静怡. 致密油藏混合水压裂实例 . 石油钻采工艺, 2014, 36(6): 74-78. doi: 10.13639/j.odpt.2014.06.018
[16]	窦宏恩, 马世英. 巴肯致密油藏开发对我国开发超低渗透油藏的启示 . 石油钻采工艺, 2012, 34(2): 120-124.
[17]	储小三, 吴晋军, 段鹏辉, 李卫兵, 梁承春, 刘立才. 水平井水力喷射与小直径封隔器联作压裂技术在长庆低渗油田中的应用　　 . 石油钻采工艺, 2012, 34(6): 73-76.
[18]	吴奇, 胥云, 刘玉章, 丁云宏, 王晓泉, 王腾飞. 美国页岩气体积改造技术现状及对我国的启示 . 石油钻采工艺, 2011, 33(2): 1-7.
[19]	马涛, 王海波, 邵红云. 烟道气驱提高采收率技术发展现状 . 石油钻采工艺, 2007, 29(5): 79-81,84. doi: 10.3969/j.issn.1000-7393.2007.05.022
[20]	罗瑞兰, 程林松. 稠油油藏注CO2适应性研究 . 石油钻采工艺, 2004, 26(5): 67-72. doi: 10.3969/j.issn.1000-7393.2004.05.021

点击查看大图

计量

文章访问数: 721
HTML全文浏览量: 71
PDF下载量: 339
被引次数: 0

考虑渗吸和驱替的致密油藏体积改造实验及多尺度模拟

doi: 10.13639/j.odpt.2016.05.025

1. 中国石油勘探开发研究院

2. 中国石油勘探开发研究院廊坊分院

3. 西南石油大学地球科学与技术学院

4. 中国石油新疆油田公司工程技术研究院

收稿日期: 2019-05-08
修回日期: 2019-05-08
刊出日期: 2016-11-08

中图分类号: TE348

关键词:

致密油藏 /

体积改造 /

渗吸 /

驱替 /

多尺度模拟

摘要: 矿场试验表明，压裂后不立即放喷，依靠焖井过程的驱替和渗吸可置换小孔隙内的原油，提高原油采出程度。为探索该过程机理，进行了实验和模拟研究。首先，带压渗吸实验，模拟裂缝壁面在驱替压差和毛管力共同作用下的渗吸行为，无因次时间中加入驱替项（Δp），对实验结果进行归一化处理；其次，建立基于CT 扫描的孔隙尺度模型，通过致密岩心采收率拟合，获得驱替、渗吸的相渗和毛管压力；最后，在油藏尺度，分别赋予基质和裂缝不同的相渗和毛管压力，模拟矿场实际油水流动。结果表明：带压渗吸采收率明显高于自发渗吸采收率，提高幅度10%~15%；无因次时间中加入驱替项，可对实验结果进行较好的归一化；调整微观孔隙结构如孔道/ 喉道半径、孔喉比、配位数等参数可以实现渗吸采收率的拟合；油藏尺度对基质/ 裂缝以及渗吸/ 驱替的划分，可准确反映开采初期含水率变化。

English Abstract

Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement

1. Research Institute of Petroleum Exploration and Development, CNPC, Beijing 100083, China

2. Langfang Branch of Research Institute, Petroleum Exploration and Development, CNPC, Langfang Hebei 065007, China

3. School of Geoscience and Technology, Southwest Petroleum University, Chengdu, Sichuan 610500, China

4. Engineering Technology Research Institute, PetroChina Xinjiang Oilfield Company, Karamay, Xinjiang 834000, China

Received Date: 2019-05-08
Rev Recd Date: 2019-05-08
Publish Date: 2016-11-08

Keywords:

Abstract: TField experiences show, before prompt blowout after fracturing, soaking process can proceed to sweep the crude oil in minor pores through displacement and imbibition to enhance oil recovery. Tests and simulation have been conducted to analyze the mechanism in these processes: First of all, pressurized imbibition tests were conducted to simulate imbibition of fracture sidewalls under joint effects of differential displacement pressures and capillary force by adding displacement (Δp) in the dimensionless time. Relevant test results were processed through normalization; Secondly, models on pore scale were constructed based on CT scanning. By fitting with oil recovery in tight cores, relative permeability and capillary pressure of displacement and imbibition can be determined; In the final step, matrix and fractures were given different relative permeability and capillary pressures on field scale to simulate actual oil/ water flows in formation. Test results show: oil recovery of pressurized imbibition is significantly higher than that of spontaneous imbibition approximately by 10%~15%; By adding the displacement term in dimensionless time, better normalization of test results can be obtained; By adjusting microscopic pore structures, such as pore/pore throat radius, pore throat ratio, coordination number and other parameters, satisfactory matching between imbibition and oil recovery can be performed; Partition of matrix/fracture and imbibition/ displacement on field scale may accurately reflect changes in watercut in early development stages.

引用本文:

Citation:

LI Shuai, DING Yunhong, MENG Di, LU Yongjun, XU Jiangwen. Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement[J]. Oil Drilling & Production Technology, 2016, 38(5): 678-683. doi: 10.13639/j.odpt.2016.05.025