不同偏心度的环空涡动流场特性

张晋凯; 李根生; 黄中伟; 田守嶒; 宋先知; 王海柱

doi:10.13639/j.odpt.2016.02.001

高级检索

E-mail Alert

不同偏心度的环空涡动流场特性

张晋凯, 李根生, 黄中伟, 田守嶒, 宋先知, 王海柱

文章导航 > 石油钻采工艺 > 2016 > 38(2): 133-137

张晋凯, 李根生, 黄中伟, 田守嶒, 宋先知, 王海柱. 不同偏心度的环空涡动流场特性[J]. 石油钻采工艺, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

引用本文:

张晋凯, 李根生, 黄中伟, 田守嶒, 宋先知, 王海柱. 不同偏心度的环空涡动流场特性[J]. 石油钻采工艺, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

ZHANG Jinkai, LI Gensheng, HUANG Zhongwei, TIAN Shouceng, SONG Xianzhi, WANG Haizhu. Features of vortex flow fields in annuluses with different eccentricities[J]. Oil Drilling & Production Technology, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

Citation:

ZHANG Jinkai, LI Gensheng, HUANG Zhongwei, TIAN Shouceng, SONG Xianzhi, WANG Haizhu. Features of vortex flow fields in annuluses with different eccentricities[J]. Oil Drilling & Production Technology, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

不同偏心度的环空涡动流场特性

doi: 10.13639/j.odpt.2016.02.001

1.
油气资源与探测国家重点实验室
2.
中国石化石油工程技术研究院

详细信息

中图分类号: TE21

Features of vortex flow fields in annuluses with different eccentricities

1.
State Key Laboratory of Petroleum Resources and Prospecting, Beijing 102249, China
2.
SINOPEC Research Institute of Petroleum Engineering, Beijing 100101, China

摘要: 为了深入研究环空涡动时的流场特性，根据流体力学理论，以连续性方程和N-S 方程为控制方程，利用计算流体力学技术对钻柱涡动时环空赫巴流体的流动进行了系统的数值模拟，研究了不同公转方向下钻柱偏心度的变化对环空切向速度剖面与合速度剖面的影响。通过对模拟数据的对比分析，发现不同公转方向下环空流场分布截然不同，正向公转时切向速度在环空宽间隙处随着公转速度、自转速度和偏心度增大正向增大；反向公转时会出现二次流，切向速度在环空宽间隙处随偏心度的减小整体反向减小，同时二次流趋势越明显，摩阻压耗越大。合理应用这些规律有助于完善现有钻井水力学理论，更好地揭示井下环空流场特性，并为钻井水力参数优化设计提供有效的理论指导。
- 涡动 /
- 环空 /
- 赫巴流体 /
- 摩阻压耗 /
- 数值模拟 /
- 流场
Abstract: To further understand features of flow field during vortex in annulus, impacts of eccentricity variations on tangential velocity profile and resultant velocity profile of annulus under different rotation directions were determined according to the fluid dynamics theories and with continuity equation and N-S equation as controlling equations. In this study, systematic numerical simulations were performed on flows of Hershel-Bulkley fluid in annulus during vortex of drill pipes by using fluid dynamics. Through comparison of simulation data, it is seen that distributions of flow fields in the annulus are significantly different in different rotation directions. During rotation in positive direction, tangential velocity increases with the increases of revolution speed, speed of autorotation and eccentricity around wide clearance of annulus. During rotation in negative position, secondary flows are observed, and tangential velocity decreases reversely with the decreases of eccentricity in wide clearance of the annulus. Moreover, more obvious the trends of secondary flows, higher the frictional pressure losses. Proper application of these patterns may improve existing hydraulic theories for drilling operations to highlight properties of flow fields in the annulus and to provide theoretical guidance for design and optimization of hydraulic parameters for drilling operations.
- vortex /
- annulus /
- Hershel-Bulkley fluid /
- frictional pressure loss /
- numerical simulation /
- flow field

[1]	陈绪跃, 曹通, 高德利, 杨进, 刘明涛, 杨书港. 射流磨钻头流场特性及其外排屑槽影响的数值模拟 . 石油钻采工艺, 2020, 42(2): 162-166. doi: 10.13639/j.odpt.2020.02.007
[2]	闫炎, 管志川, 杨才, 阎卫军, 耿潇. 领眼与扩眼双级PDC钻头井底流场数值模拟 . 石油钻采工艺, 2019, 41(1): 31-37. doi: 10.13639/j.odpt.2019.01.006
[3]	范白涛, 邓金根, 林海, 吴锐, 刘伟, 谭强. 疏松砂岩油藏压裂裂缝延伸规律数值模拟 . 石油钻采工艺, 2018, 40(5): 626-632. doi: 10.13639/j.odpt.2018.05.015
[4]	余东合, 徐康泰, 车航, 张登文, 刘国华, 马新仿. 基于细观损伤多相耦合的砂砾岩水力压裂裂缝扩展数值模拟 . 石油钻采工艺, 2016, 38(3): 352-358. doi: 10.13639/j.odpt.2016.03.015
[5]	王嘉松, 蒋世全, 许亮斌. 深水钻井隔水管涡激振动特性的数值模拟研究 . 石油钻采工艺, 2015, 37(1): 30-35. doi: 10.13639/j.odpt.2015.01.007
[6]	刘爽, 李根生, 史怀忠, 田守嶒. 水力脉冲射流旋流流场数值模拟 . 石油钻采工艺, 2015, 37(5): 17-21. doi: 10.13639/j.odpt.2015.05.005
[7]	冯福平, 艾池, 崔志华, 于法浩, 陈顶峰, 徐海粟. 水平井偏心环空顶替流体密度差优化 . 石油钻采工艺, 2014, 36(1): 61-65.
[8]	付建民, 韩雪银, 孙晓飞, 和鹏飞, 张晓广. PDC 钻头防涡技术在砾岩地层中的应用 . 石油钻采工艺, 2012, 34(增刊): 5-8.
[9]	张小宁, 姜凤光, 李根生, 张明坤. 泡沫在连续管螺旋管段内流动的压降数值模拟（）　　摘要：　　关键词：　　中图分类号： . 石油钻采工艺, 2011, 33(6): 5-9.
[10]	余金海, 孙宁, 刘健. 精细控压钻井控压响应时间浅析 . 石油钻采工艺, 2011, 33(2): 20-24.
[11]	戴荣东, 潘敏, 王朝平, 王贵振. 钻柱涡动情况下疲劳损伤浅析 . 石油钻采工艺, 2010, 32(6): 19-22.
[12]	侯成, 李根生, 黄中伟, 田守嶒, 史怀忠. 定向喷嘴PDC钻头井底流场特性研究 . 石油钻采工艺, 2010, 32(2): 15-18.
[13]	蔡萌. 幂律流体偏心环空螺旋流压力梯度的数值计算 . 石油钻采工艺, 2010, 32(2): 11-14.
[14]	李子丰, 王兆运, 阳鑫军, 田新民. 钻柱涡动分析及防涡稳定器设计 . 石油钻采工艺, 2008, 30(3): 124-127.
[15]	陈民锋, 姜汉桥, 周琦. 低渗透砂岩油藏水井压裂参数优化数值模拟研究 . 石油钻采工艺, 2007, 29(1): 54-57. doi: 10.3969/j.issn.1000-7393.2007.01.016
[16]	张军, 郑捷庆. 气—幂律两相流体流经截面突缩管的数值模拟 . 石油钻采工艺, 2007, 29(3): 108-110,113. doi: 10.3969/j.issn.1000-7393.2007.03.034
[17]	李兆敏, 李松岩, 尚朝辉, 李勇. 流速和环空偏心对泡沫携砂能力的影响数值模拟 . 石油钻采工艺, 2007, 29(3): 97-100. doi: 10.3969/j.issn.1000-7393.2007.03.031
[18]	张平, 赵金洲, 郭大立, 陈汶滨, 田继东. 水力压裂裂缝三维延伸数值模拟研究 . 石油钻采工艺, 1997, 19(3): 53-59,69. doi: 10.3969/j.issn.1000-7393.1997.03.013
[19]	吴迪祥, 刘忠春. 水力压裂垂直裂缝形态的数值模拟 . 石油钻采工艺, 1991, 13(4): 57-61. doi: 10.3969/j.issn.1000-7393.1991.04.010
[20]	刘希圣, 朱国新, 丁岗. 井底流场模拟实验的示踪方法 . 石油钻采工艺, 1989, 11(3): 1-5. doi: 10.3969/j.issn.1000-7393.1989.03.001

点击查看大图

计量

文章访问数: 767
HTML全文浏览量: 28
PDF下载量: 717
被引次数: 0

不同偏心度的环空涡动流场特性

doi: 10.13639/j.odpt.2016.02.001

1. 油气资源与探测国家重点实验室

2. 中国石化石油工程技术研究院

收稿日期: 2019-05-20
修回日期: 2019-05-20
刊出日期: 2016-05-10

中图分类号: TE21

关键词:

涡动 /

环空 /

摘要: 为了深入研究环空涡动时的流场特性，根据流体力学理论，以连续性方程和N-S 方程为控制方程，利用计算流体力学技术对钻柱涡动时环空赫巴流体的流动进行了系统的数值模拟，研究了不同公转方向下钻柱偏心度的变化对环空切向速度剖面与合速度剖面的影响。通过对模拟数据的对比分析，发现不同公转方向下环空流场分布截然不同，正向公转时切向速度在环空宽间隙处随着公转速度、自转速度和偏心度增大正向增大；反向公转时会出现二次流，切向速度在环空宽间隙处随偏心度的减小整体反向减小，同时二次流趋势越明显，摩阻压耗越大。合理应用这些规律有助于完善现有钻井水力学理论，更好地揭示井下环空流场特性，并为钻井水力参数优化设计提供有效的理论指导。

English Abstract

Features of vortex flow fields in annuluses with different eccentricities

1. State Key Laboratory of Petroleum Resources and Prospecting, Beijing 102249, China

2. SINOPEC Research Institute of Petroleum Engineering, Beijing 100101, China

Received Date: 2019-05-20
Rev Recd Date: 2019-05-20
Publish Date: 2016-05-10

Keywords:

Abstract: To further understand features of flow field during vortex in annulus, impacts of eccentricity variations on tangential velocity profile and resultant velocity profile of annulus under different rotation directions were determined according to the fluid dynamics theories and with continuity equation and N-S equation as controlling equations. In this study, systematic numerical simulations were performed on flows of Hershel-Bulkley fluid in annulus during vortex of drill pipes by using fluid dynamics. Through comparison of simulation data, it is seen that distributions of flow fields in the annulus are significantly different in different rotation directions. During rotation in positive direction, tangential velocity increases with the increases of revolution speed, speed of autorotation and eccentricity around wide clearance of annulus. During rotation in negative position, secondary flows are observed, and tangential velocity decreases reversely with the decreases of eccentricity in wide clearance of the annulus. Moreover, more obvious the trends of secondary flows, higher the frictional pressure losses. Proper application of these patterns may improve existing hydraulic theories for drilling operations to highlight properties of flow fields in the annulus and to provide theoretical guidance for design and optimization of hydraulic parameters for drilling operations.

张晋凯, 李根生, 黄中伟, 田守嶒, 宋先知, 王海柱. 不同偏心度的环空涡动流场特性[J]. 石油钻采工艺, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

引用本文:

张晋凯, 李根生, 黄中伟, 田守嶒, 宋先知, 王海柱. 不同偏心度的环空涡动流场特性[J]. 石油钻采工艺, 2016, 38(2): 133-137. doi: 10.13639/j.odpt.2016.02.001

Citation: