适用于高温高矿化度条件的聚乙烯亚胺冻胶堵水剂

吴运强; 毕岩滨; 纪萍; 汪进; 贾寒; 周洪涛

doi:10.13639/j.odpt.2015.04.028

高级检索

E-mail Alert

适用于高温高矿化度条件的聚乙烯亚胺冻胶堵水剂

吴运强, 毕岩滨, 纪萍, 汪进, 贾寒, 周洪涛

文章导航 > 石油钻采工艺 > 2015 > 37(4): 113-116

吴运强, 毕岩滨, 纪萍, 汪进, 贾寒, 周洪涛. 适用于高温高矿化度条件的聚乙烯亚胺冻胶堵水剂[J]. 石油钻采工艺, 2015, 37(4): 113-116. doi: 10.13639/j.odpt.2015.04.028

引用本文:

WU Yunqiang, BI Yanbin, JI Ping, WANG Jin, JIA Han, ZHOU Hongtao. Water shutoff agent of PEI gel applicable to high temperature and high salinity reservoirs[J]. Oil Drilling & Production Technology, 2015, 37(4): 113-116. doi: 10.13639/j.odpt.2015.04.028

Citation:

WU Yunqiang, BI Yanbin, JI Ping, WANG Jin, JIA Han, ZHOU Hongtao. Water shutoff agent of PEI gel applicable to high temperature and high salinity reservoirs[J]. Oil Drilling & Production Technology, 2015, 37(4): 113-116. doi: 10.13639/j.odpt.2015.04.028

适用于高温高矿化度条件的聚乙烯亚胺冻胶堵水剂

doi: 10.13639/j.odpt.2015.04.028

1.
新疆油田分公司实验检测研究院，新疆克拉玛依　834000
2.
中海油能源发展股份有限公司采油技术服务分公司，天津　300457
3.
新疆油田公司采油一厂，新疆克拉玛依　834000
4.
中国石油大学华东石油工程学院，山东青岛　266555

详细信息

中图分类号: TE358

Water shutoff agent of PEI gel applicable to high temperature and high salinity reservoirs

1.
Research Institute of Experiment and Detection, Xinjiang Oilfield Company, CNPC, Karamay 834000, China
2.
Oil Production Technology Services Branch, CNOOC Energy Technology &
3.
Services Co. Ltd., Tianjing 300457, China
4.
No.1 Oil Production Plant of Xinjiang Oilfield Company, Karamay 834000, China

摘要: 针对高温高矿化度地层堵水需求，研制了一种耐高温高矿化度的以阴离子聚丙烯酰胺为主剂的冻胶型堵剂，交联剂采用水溶性聚合物聚乙烯亚胺（PEI），并加入保护剂减缓高温下主剂的水解。实验考察了主剂质量分数、主剂分子量、PEI 质量分数、PEI 分子量、矿化度和pH 值等因素对PEI 冻胶成胶性能的影响。实验结果表明：随着主剂和PEI 相对分子质量增加，主剂和PEI 质量分数的增加，成胶时间缩短，但交联剂质量分数过高易发生过交联现象，造成冻胶过早脱水；成胶时间随着pH 值的增加而缩短，随矿化度的增加而变长。在110 ℃条件下，对于NaCl 含量为50 000 mg/L 的地层水，该冻胶强度高，耐温性好，封堵效果好且至少120 d 不脱水。堵剂体系最佳配方为：0.6%~0.8% 阴离子聚丙烯酰胺+0.3%~0.7%PEI+0.8%~1% 高温保护剂。
- 聚乙烯亚胺冻胶 /
- 成胶时间 /
- 高温高矿化度 /
- 阴离子聚丙烯酰胺 /
- 堵水剂
Abstract: A gel type shutoff agent with anionic polyacrylamide as a main agent required for high temperature and high salinity formation water shutoff was developed using a crosslinking agent of water soluble polymer-polyethylenimine (PEI), and protective agent was added to slow down hydrolysis of the main agent under high temperature. The impact of main agent mass fraction, main agent molecular weight, PEI mass fraction, PEI molecular weight, salinity and pH was experimentally investigated on gelling performance of PEI gel. Experimental results show that the relative molecular weights of main agent and PEI increase as the mass fraction of main agent and PEI increases while the gelation time is shortened. But under high mass fraction, excessive crosslinking is more likely to occur, causing premature gel dehydration. The gelation time is shortened with the increase of pH values, and becomes longer with the increase of salinity. At 110 ℃, for formation water with NaCl content of 50 000 mg / L, the gel shows high strength and good resistance to temperature and good blocking effectiveness, and remains hydrated for at least 120 days. The optimum formula for water shutoff system is 0.6% to 0.8% anionic polyacrylamide 0.3% to 0.7% PEI 0.8% to 1% high temperature protective agent.
- PEI gel /
- gelation time /
- high temperature and high salinity /
- anionic polyacrylamide /
- water shutoff agent

[1]	龚俊, 叶俊红, 秦永辉, 李勇, 安继彬, 周洪涛. 埕岛油田冻胶调剖剂过滤砂管和填砂管综合剪切性能评价 . 石油钻采工艺, 2019, 41(5): 657-662. doi: 10.13639/j.odpt.2019.05.017
[2]	程立, 陈瞰瞰, 张慢来, 刘德基, 廖锐全, 谷溢, . 氧化/ 交联双重改性淀粉冻胶 . 石油钻采工艺, 2015, 37(3): 106-109. doi: 10.13639/j.odpt.2015.03.024
[3]	罗宪波, 蒲万芬, 武海燕, 赵金洲, 姚奕明. 新型裂缝性低渗透油藏堵水剂的研制 . 石油钻采工艺, 2005, 27(1): 54-57. doi: 10.3969/j.issn.1000-7393.2005.01.017
[4]	罗宪波, 蒲万芬, 武海燕, 赵金洲, 姚奕明. 新型裂缝性低渗透油藏堵水剂性能评价 . 石油钻采工艺, 2005, 27(2): 64-66. doi: 10.3969/j.issn.1000-7393.2005.02.020
[5]	孙仁远, 成国祥, 彭文丰, 侯健. HPAM/AlCit胶态分散体系段塞驱油试验 . 石油钻采工艺, 2005, 27(4): 45-47. doi: 10.3969/j.issn.1000-7393.2005.04.014
[6]	杜伟程, 吕光明, 李书玲, 王建东, 黄柏宗. 油基水泥浆堵剂的室内研究 . 石油钻采工艺, 1999, 21(3): 69-73. doi: 10.3969/j.issn.1000-7393.1999.03.012
[7]	吴新亚, 许宝荣, 周虹, 张风英. TC-938堵剂在灰岩油藏的应用研究 . 石油钻采工艺, 1998, 20(3): 81-84. doi: 10.3969/j.issn.1000-7393.1998.03.019
[8]	白宝君, 刘翔鹗, 李宇乡. 我国油田化学堵水调剖新进展 . 石油钻采工艺, 1998, 20(3): 64-68. doi: 10.3969/j.issn.1000-7393.1998.03.016
[9]	王健, 韩显卿. 高效粘弹性调堵剂的研制及应用 . 石油钻采工艺, 1998, 20(1): 85-89. doi: 10.3969/j.issn.1000-7393.1998.01.021
[10]	巨登峰, 游靖, 谷溢, 张玮. 蒙古林砂岩油藏整体调堵的现场实践 . 石油钻采工艺, 1998, 20(6): 86-90. doi: 10.3969/j.issn.1000-7393.1998.06.025
[11]	韩明, 白宝君, 王平美, 李宇乡. 冻胶类堵剂对油水的不同封堵能力研究 . 石油钻采工艺, 1997, 19(6): 53-57,62. doi: 10.3969/j.issn.1000-7393.1997.06.010
[12]	易飞, 崔会凯, 麻凤芹. 一种新型水玻璃单液法堵剂的室内试验 . 石油钻采工艺, 1994, 16(2): 91-94. doi: 10.3969/j.issn.1000-7393.1994.02.020
[13]	高振环, 陈静惠, 宋合龙, 王德喜, 孙玉珠, 孙善军. 树脂小球堵水现场试验及效果分析 . 石油钻采工艺, 1994, 16(6): 73-75,87. doi: 10.3969/j.issn.1000-7393.1994.06.014
[14]	高振环, 陈静惠, 宋合龙. 油井树脂小球堵水剂及其制法 . 石油钻采工艺, 1994, 16(6): 69-72. doi: 10.3969/j.issn.1000-7393.1994.06.013
[15]	刘晓平. 122复合堵剂封串堵水工艺技术 . 石油钻采工艺, 1993, 15(2): 86-90. doi: 10.3969/j.issn.1000-7393.1993.02.016
[16]	马广彦, 庞岁社. 冻胶调剖剂对多孔介质封堵行为的评价方法 . 石油钻采工艺, 1993, 15(6): 71-74. doi: 10.3969/j.issn.1000-7393.1993.06.012
[17]	史凤琴. 国内外油田化学堵水剂 . 石油钻采工艺, 1992, 14(5): 77-85. doi: 10.3969/j.issn.1000-7393.1992.05.015
[18]	巨登峰. 灰岩油藏大缝洞堵水剂的研究与应用 . 石油钻采工艺, 1991, 13(6): 83-89. doi: 10.3969/j.issn.1000-7393.1991.06.016
[19]	田洪昆, 于连成. 聚丙烯酰胺高温堵水剂的研制 . 石油钻采工艺, 1988, 10(7): 15-22. doi: 10.3969/j.issn.1000-7393.1988.07.003
[20]	蒋成新. 聚丙烯酰胺-木质素磺酸钠复合铬冻胶堵水技术 . 石油钻采工艺, 1988, 10(7): 193-202,220. doi: 10.3969/j.issn.1000-7393.1988.07.022

点击查看大图

计量

文章访问数: 427
HTML全文浏览量: 20
PDF下载量: 686
被引次数: 0

适用于高温高矿化度条件的聚乙烯亚胺冻胶堵水剂

doi: 10.13639/j.odpt.2015.04.028

1. 新疆油田分公司实验检测研究院，新疆克拉玛依　834000

2. 中海油能源发展股份有限公司采油技术服务分公司，天津　300457

3. 新疆油田公司采油一厂，新疆克拉玛依　834000

4. 中国石油大学华东石油工程学院，山东青岛　266555

收稿日期: 2019-05-22
修回日期: 2019-05-22
刊出日期: 2015-08-26

中图分类号: TE358

关键词:

摘要: 针对高温高矿化度地层堵水需求，研制了一种耐高温高矿化度的以阴离子聚丙烯酰胺为主剂的冻胶型堵剂，交联剂采用水溶性聚合物聚乙烯亚胺（PEI），并加入保护剂减缓高温下主剂的水解。实验考察了主剂质量分数、主剂分子量、PEI 质量分数、PEI 分子量、矿化度和pH 值等因素对PEI 冻胶成胶性能的影响。实验结果表明：随着主剂和PEI 相对分子质量增加，主剂和PEI 质量分数的增加，成胶时间缩短，但交联剂质量分数过高易发生过交联现象，造成冻胶过早脱水；成胶时间随着pH 值的增加而缩短，随矿化度的增加而变长。在110 ℃条件下，对于NaCl 含量为50 000 mg/L 的地层水，该冻胶强度高，耐温性好，封堵效果好且至少120 d 不脱水。堵剂体系最佳配方为：0.6%~0.8% 阴离子聚丙烯酰胺+0.3%~0.7%PEI+0.8%~1% 高温保护剂。

English Abstract

Water shutoff agent of PEI gel applicable to high temperature and high salinity reservoirs

1. Research Institute of Experiment and Detection, Xinjiang Oilfield Company, CNPC, Karamay 834000, China

2. Oil Production Technology Services Branch, CNOOC Energy Technology &

3. Services Co. Ltd., Tianjing 300457, China

4. No.1 Oil Production Plant of Xinjiang Oilfield Company, Karamay 834000, China

Received Date: 2019-05-22
Rev Recd Date: 2019-05-22
Publish Date: 2015-08-26

Keywords:

Abstract: A gel type shutoff agent with anionic polyacrylamide as a main agent required for high temperature and high salinity formation water shutoff was developed using a crosslinking agent of water soluble polymer-polyethylenimine (PEI), and protective agent was added to slow down hydrolysis of the main agent under high temperature. The impact of main agent mass fraction, main agent molecular weight, PEI mass fraction, PEI molecular weight, salinity and pH was experimentally investigated on gelling performance of PEI gel. Experimental results show that the relative molecular weights of main agent and PEI increase as the mass fraction of main agent and PEI increases while the gelation time is shortened. But under high mass fraction, excessive crosslinking is more likely to occur, causing premature gel dehydration. The gelation time is shortened with the increase of pH values, and becomes longer with the increase of salinity. At 110 ℃, for formation water with NaCl content of 50 000 mg / L, the gel shows high strength and good resistance to temperature and good blocking effectiveness, and remains hydrated for at least 120 days. The optimum formula for water shutoff system is 0.6% to 0.8% anionic polyacrylamide 0.3% to 0.7% PEI 0.8% to 1% high temperature protective agent.

引用本文: