金平1井浅层长水平段水平井钻井技术

唐洪林; 唐志军; 闫振来; 祁宏军; 李涛

高级检索

E-mail Alert

金平1井浅层长水平段水平井钻井技术

唐洪林, 唐志军, 闫振来, 祁宏军, 李涛

文章导航 > 石油钻采工艺 > 2008 > 30(6): 11-15

唐洪林, 唐志军, 闫振来, 祁宏军, 李涛. 金平1井浅层长水平段水平井钻井技术[J]. 石油钻采工艺, 2008, 30(6): 11-15.

引用本文:

唐洪林, 唐志军, 闫振来, 祁宏军, 李涛. 金平1井浅层长水平段水平井钻井技术[J]. 石油钻采工艺, 2008, 30(6): 11-15.

TANG Honglin, TANG Zhijun, YAN Zhenlai, QI Hongjun, LI Tao. Drilling techniques of shallow long horizontal-section well of Jinping 1 well[J]. Oil Drilling & Production Technology, 2008, 30(6): 11-15.

Citation:

TANG Honglin, TANG Zhijun, YAN Zhenlai, QI Hongjun, LI Tao. Drilling techniques of shallow long horizontal-section well of Jinping 1 well[J]. Oil Drilling & Production Technology, 2008, 30(6): 11-15.

金平1井浅层长水平段水平井钻井技术

1.
中国石化集团胜利石油管理局钻井工艺研究院，山东东营　 257017

详细信息

中图分类号: TE243

Drilling techniques of shallow long horizontal-section well of Jinping 1 well

1.
Drilling Technology Research Institute, Shengli Petroleum Administration, Sinopec, Dongying 257017, China

摘要: 长水平段水平井可增加油气藏的裸露面积，显著提高边际油气藏的综合开发效益。为了检验前期研究成果，进一步丰富完善长水平段水平井钻井技术，决定部署一口阶段试验井——金平1 井。在剖析该井施工难点的基础上，重点阐述了其井身结构与井眼轨道优化设计、大井眼浅层定向、井眼轨迹控制、钻具组合优化、安全钻进等关键技术，通过对水平段摩阻扭矩的理论与实际分析对比，保障了现场施工的顺利进行。该井的成功完钻，积累了大位移及长水平段水平井钻井技术经验，并创造了胜利油田3 项技术指标，位垂比达到了2.803，是当时国内陆上油田位垂比最大的一口井。
- 长水平段水平井 /
- 浅层 /
- 大井眼 /
- 井眼轨道 /
- 优化设计 /
- 金平1 井
Abstract: Long horizontal-section well can increase reservoir bare area and improve overall development beneficial results ofmarginal fields obviously. In order to examine preceding research results and improve drilling techniques of long horizontal-section wellfuture, the first experimental well of long horizontal-section well, Jinping 1 well, is planned to be allocated. On the basis of analyzingthe difficulties in operating the well, the article lays emphasis on the discussion of some key techniques, such as the optimization designof wellbore structure and well path design, the large hole shallow surface hole directional drilling, the well trajectory control , the BHAoptimization and safe drilling. Based on correlation analysis of the theory and the practical operation of torque and drag in horizontalsection, the field operation goes smoothly. The successful drilling of the well provides valuable experience in extended-reach horizontaland long horizontal-section well drilling, creating three records in the Shengli Oilfield, with the ratio of horizontal displacement to truevertical depth hitting 2.803. This is the highest among all onshore oilfields in China at that time.
- long horizontal-section well /
- shallow surface /
- large hole /
- well trajectory /
- optimization design /
- Jinping 1 well

[1]

［1］王俊明，周明信，沙东，等. 张海502FH 大位移分支水平
井钻井技术［J］. 石油钻探技术，2007，35（5）：114-117.
WANG Junming, ZHOU Mingxin, SHA Dong, et al. Drillingtechniques in extended reach multilateral well Zhanghai502FH
［J］. Petroleum Drilling Techniques, 2007, 35（5）:114-117.
［2］秦永和. 大港油田大位移井实践和技术最新进展［J］.
石油钻探技术，2006，34（4）：30-33.
QIN Yonghe. Novel developments of ERW technology in the
Dagang oilfield［J］. Petroleum Drilling Techniques, 2006，34（4）: 30-33.
［3］王学俭. 浅层定向井连续控制钻井技术［J］. 石油钻
探技术，2004，32（5）：62-63.
WANG Xuejian. Application of continuously controlled drilling techniques in shallow directional wells［J］. Petroleum
Drilling Techniques, 2004, 32（5）: 62-63.
［3］薛建国，吴应战，王冰晖，等. 超浅层大位移水平井楼平
2 井钻井技术［J］. 石油钻采工艺，2008，30（3）：11-15.
XUE Jianguo, WU Yingzhan, WANG Binghui, et al. Drilling techniques in ultra-shallow extended-reach Louping-2
horizontal well［J］.Oil Drilling & Production Technology，2008, 30（3）: 11-15.

[1]	董平华, 董昆, 霍宏博, 窦蓬, 余涵, 胡成军. 渤海油田大井眼深钻综合钻井液维护技术 . 石油钻采工艺, 2018, 40(S1): 139-142. doi: 10.13639/j.odpt.2018.S0.039
[2]	田宗强, 鹿传世, 王成龙, 韩成. 东方1-1气田浅层大位移水平井钻井技术 . 石油钻采工艺, 2018, 40(2): 157-163. doi: 10.13639/j.odpt.2018.02.002
[3]	胥豪, 牛洪波, 牛似成, 王翔, 孙荣华. 六段制三维水平井轨道优化设计与应用 . 石油钻采工艺, 2017, 39(5): 564-569. doi: 10.13639/j.odpt.2017.05.006
[4]	冯林, 母亚军, 杨代明, 周喜勇, 汤分周. 马深1 井二开大井眼优快钻井技术 . 石油钻采工艺, 2016, 38(5): 577-582. doi: 10.13639/j.odpt.2016.05.007
[5]	白晓虎, 齐银, 陆红军, 段鹏辉, 顾燕凌, 吴甫让. 鄂尔多斯盆地致密油水平井体积压裂优化设计 . 石油钻采工艺, 2015, 37(4): 83-86. doi: 10.13639/j.odpt.2015.04.022
[6]	邹大鹏. 大庆油田致密油水平井强抑制防塌水基钻井液技术 . 石油钻采工艺, 2015, 37(3): 36-39. doi: 10.13639/j.odpt.2015.03.009
[7]	鲁港, 刘乃震, 余雷, 夏泊, 佟长海. 双靶点三维井眼轨道设计的解析法（II） . 石油钻采工艺, 2011, 33(1): 7-11.
[8]	刘修善. 三维悬链线轨道的设计方法 . 石油钻采工艺, 2010, 32(6): 7-10.
[9]	鲁港, 刘乃震, 余雷, 夏泊洢, 佟长海. 双靶点三维井眼轨道设计的解析法（I） . 石油钻采工艺, 2010, 32(6): 1-6.
[10]	王立波, 鲁港. 三维定向井轨道设计新方法─恒装置角法 . 石油钻采工艺, 2009, 31(1): 18-21.
[11]	史洪军, 闫振来, 赵莉. 沾18-支平1鱼骨状水平井钻井技术 . 石油钻采工艺, 2008, 30(6): 21-24.
[12]	王卓飞, 魏新春, 江莉, 栾海军, 徐明强, 邹瑜. 克拉玛依浅层稠油吞吐井化学调剖技术试验研究 . 石油钻采工艺, 2007, 29(5): 69-74. doi: 10.3969/j.issn.1000-7393.2007.05.020
[13]	王峰, 李兴科, 刘长宇, 王楠. 吉林油田浅层定向井、浅层水平井举升工艺 . 石油钻采工艺, 2007, 29(5): 41-44. doi: 10.3969/j.issn.1000-7393.2007.05.013
[14]	黄根炉, 赵金海, 赵金洲, 韩来聚. 限定目标点井眼方向待钻轨道设计新方法 . 石油钻采工艺, 2006, 28(1): 19-22. doi: 10.3969/j.issn.1000-7393.2006.01.006
[15]	董长银, 张琪, 曲占庆. 水平井砾石充填参数优化设计的正交数值试验法 . 石油钻采工艺, 2004, 26(2): 42-44. doi: 10.3969/j.issn.1000-7393.2004.02.013
[16]	黄根炉, 赵金海, 赵金洲, 韩来聚. 基于地质导向的水平井中靶优化设计 . 石油钻采工艺, 2004, 26(6): 1-3. doi: 10.3969/j.issn.1000-7393.2004.06.001
[17]	石晓兵, 施太和, 许树谦, 王兆会. 浅层稠油油藏水平井井眼稳定性分析 . 石油钻采工艺, 1999, 21(5): 14-18. doi: 10.3969/j.issn.1000-7393.1999.05.004
[18]	陈德信, 陶瑞东. 红9-1浅层大位移定向井钻井技术实践 . 石油钻采工艺, 1998, 20(3): 10-14. doi: 10.3969/j.issn.1000-7393.1998.03.002
[19]	张和茂, 赵子仁, 伊明. 浅层水平井井眼轨迹控制技术 . 石油钻采工艺, 1998, 20(5): 1-5. doi: 10.3969/j.issn.1000-7393.1998.05.001
[20]	胡博仲, 董福洲, 周继德. 有杆泵井抽油参数的优化设计 . 石油钻采工艺, 1990, 12(2): 49-61. doi: 10.3969/j.issn.1000-7393.1990.02.007

点击查看大图

计量

文章访问数: 3584
HTML全文浏览量: 38
PDF下载量: 45
被引次数: 0

金平1井浅层长水平段水平井钻井技术

1. 中国石化集团胜利石油管理局钻井工艺研究院，山东东营　 257017

收稿日期: 2019-05-16
修回日期: 2019-05-16
刊出日期: 2009-01-21

中图分类号: TE243

关键词:

长水平段水平井 /

浅层 /

大井眼 /

井眼轨道 /

优化设计 /

金平1 井

摘要: 长水平段水平井可增加油气藏的裸露面积，显著提高边际油气藏的综合开发效益。为了检验前期研究成果，进一步丰富完善长水平段水平井钻井技术，决定部署一口阶段试验井——金平1 井。在剖析该井施工难点的基础上，重点阐述了其井身结构与井眼轨道优化设计、大井眼浅层定向、井眼轨迹控制、钻具组合优化、安全钻进等关键技术，通过对水平段摩阻扭矩的理论与实际分析对比，保障了现场施工的顺利进行。该井的成功完钻，积累了大位移及长水平段水平井钻井技术经验，并创造了胜利油田3 项技术指标，位垂比达到了2.803，是当时国内陆上油田位垂比最大的一口井。

English Abstract

Drilling techniques of shallow long horizontal-section well of Jinping 1 well

1. Drilling Technology Research Institute, Shengli Petroleum Administration, Sinopec, Dongying 257017, China

Received Date: 2019-05-16
Rev Recd Date: 2019-05-16
Publish Date: 2009-01-21

Keywords:

Abstract: Long horizontal-section well can increase reservoir bare area and improve overall development beneficial results ofmarginal fields obviously. In order to examine preceding research results and improve drilling techniques of long horizontal-section wellfuture, the first experimental well of long horizontal-section well, Jinping 1 well, is planned to be allocated. On the basis of analyzingthe difficulties in operating the well, the article lays emphasis on the discussion of some key techniques, such as the optimization designof wellbore structure and well path design, the large hole shallow surface hole directional drilling, the well trajectory control , the BHAoptimization and safe drilling. Based on correlation analysis of the theory and the practical operation of torque and drag in horizontalsection, the field operation goes smoothly. The successful drilling of the well provides valuable experience in extended-reach horizontaland long horizontal-section well drilling, creating three records in the Shengli Oilfield, with the ratio of horizontal displacement to truevertical depth hitting 2.803. This is the highest among all onshore oilfields in China at that time.

唐洪林, 唐志军, 闫振来, 祁宏军, 李涛. 金平1井浅层长水平段水平井钻井技术[J]. 石油钻采工艺, 2008, 30(6): 11-15.

引用本文:

唐洪林, 唐志军, 闫振来, 祁宏军, 李涛. 金平1井浅层长水平段水平井钻井技术[J]. 石油钻采工艺, 2008, 30(6): 11-15.

TANG Honglin, TANG Zhijun, YAN Zhenlai, QI Hongjun, LI Tao. Drilling techniques of shallow long horizontal-section well of Jinping 1 well[J]. Oil Drilling & Production Technology, 2008, 30(6): 11-15.

Citation: