旋冲钻井在塔河工区超深井段的应用

索忠伟; 王甲昌; 张海平; 李广国; 张仁龙; 敬辉阳

高级检索

E-mail Alert

旋冲钻井在塔河工区超深井段的应用

索忠伟, 王甲昌, 张海平, 李广国, 张仁龙, 敬辉阳

文章导航 > 石油钻采工艺 > 2013 > 35(4): 44-47

索忠伟, 王甲昌, 张海平, 李广国, 张仁龙, 敬辉阳. 旋冲钻井在塔河工区超深井段的应用[J]. 石油钻采工艺, 2013, 35(4): 44-47.

引用本文:

索忠伟, 王甲昌, 张海平, 李广国, 张仁龙, 敬辉阳. 旋冲钻井在塔河工区超深井段的应用[J]. 石油钻采工艺, 2013, 35(4): 44-47.

SUO Zhongwei, WANG Jiachang, ZHANG Haiping, LI Guangguo, ZHANG Renlong, JING Huiyang. Application of rotary percussion drilling on the super deep section in Tahe Field[J]. Oil Drilling & Production Technology, 2013, 35(4): 44-47.

Citation:

SUO Zhongwei, WANG Jiachang, ZHANG Haiping, LI Guangguo, ZHANG Renlong, JING Huiyang. Application of rotary percussion drilling on the super deep section in Tahe Field[J]. Oil Drilling & Production Technology, 2013, 35(4): 44-47.

旋冲钻井在塔河工区超深井段的应用

1.
中国石油化工股份有限公司石油工程技术研究院，北京　100101
2.
华东石油局钻井公司，江苏镇江　 212003
3.
中国石油天然气管道局天津设计院，天津　300457

详细信息

中图分类号: TE249

Application of rotary percussion drilling on the super deep section in Tahe Field

1.
SINOPEC Petroleum Engineering and Technology Research Institute, Beijing 100101, China
2.
Drilling Company, EastChina Petroleum Administration Bureau, Zhenjiang 212003, China
3.
Tianjin Design Research Institute, CNPC Pipe Administration Bureau, Tanggu 300457, China

摘要: 为提高新疆塔河工区深部地层机械钻速，在该区块试验应用了旋冲钻井技术。针对新疆塔河工区深部地层岩性特点和钻头选型情况，优选出旋冲钻井匹配钻头，优化并确定出射流冲击器结构性能参数。使用改进后射流冲击器首先在塔河工区S116-3井中配合PDC钻头在超深井段进行探索性应用，验证射流冲击器+PDC钻头的可行性，应用井深达6 086 m。随之，在TP324井进行了长井段现场应用，实现了液动射流冲击器与PDC钻头配合实质性应用。S116-3井应用井段：5 998.41~6 086 m，TP324井应用井段为6 151.65~6 912 m，总进尺847.94 m，总纯钻时间314.02，机械钻速同比提高32%~45%。S116-3、TP324井应用结果验证了该技术在深井超深井的提速效果及可靠性，为塔河工区深部地层探索了新的途径。
- 旋冲钻井 /
- 射流冲击器 /
- PDC钻头 /
- 超深井　　
Abstract: To improve the Rate Of Penetration(ROP) for drilling deep formations in Tahe Field, rotary percussion drilling technique was tested. According to the lithologic features and drilling bit type selection in the region, the fixed bit was selected, and the structural properties of jet impactor were optimized and fixed. The improved jet impactor was firstly put into usage in the super deep section of Well S116-3, combined with PDC bit, proving the feasibility of jet impactor + PDC bit, and the depth reached 6 086 m. As following, it was field applied on Well TP324, which realized the real application of the combination of jet impactor and PDC bit. As a result, the application depth range of Well S116-3 was 5 998.41~6 086 m, and it was 6 151.65~6 912 m for Well TP324, so the total penetration was 848.16 m. The total net drilling period was 314.02, and the ROP was increased by 32%~45%. The application on the two wells proved the effect and reliability of the technique in deep and super deep wells. It supplied novel way to develop Tahe deep formation.
- rotary percussion drilling /
- jet impactor /
- PDC bit /
- super deep well

[1]	石李保, 邹德永, 王皓琰, 汪威, 宋洵成. PDC切削齿切削深度对PDC钻头黏滑振动影响动态实验 . 石油钻采工艺, 2021, 43(6): 750-755, 790. doi: 10.13639/j.odpt.2021.06.010
[2]	王滨, 邹德永, 李军, 杨宏伟, 黄涛. 深部及复杂地层中PDC钻头综合改进方法 . 石油钻采工艺, 2018, 40(1): 44-51. doi: 10.13639/j.odpt.2018.01.008
[3]	李美求, 李嘉文, 李宁, 罗竞波. 周向冲击扭矩作用下PDC钻头的黏滑振动分析 . 石油钻采工艺, 2018, 40(3): 287-292. doi: 10.13639/j.odpt.2018.03.002
[4]	陈勇, 吴仲华, 聂云飞, 陈忠帅, 曹小娟, 李爱星. 应用于螺杆钻具的轴向振动冲击装置研制 . 石油钻采工艺, 2017, 39(2): 212-217. doi: 10.13639/j.odpt.2017.02.016
[5]	黄鸿, 李俞静, 陈松平. 吉木萨尔地区致密油藏水平井优快钻井技术 . 石油钻采工艺, 2014, 36(4): 10-12. doi: 10.13639/j.odpt.2014.04.003
[6]	侯子旭, 贾晓斌, 李双贵, 邓文良, 曾德智. 玉北地区深部地层扭力冲击器提速工艺　　 . 石油钻采工艺, 2013, 35(5): 132-136.
[7]	陈世春, 丛长江, 秦岭, 王树超, 李勇. 山前高陡构造复杂井东秋6井钻井实践 . 石油钻采工艺, 2010, 32(4): 5-7.
[8]	侯成, 李根生, 黄中伟, 田守嶒, 史怀忠. 定向喷嘴PDC钻头井底流场特性研究 . 石油钻采工艺, 2010, 32(2): 15-18.
[9]	朱海燕, 王锡洲, 刘时英, 刘清友. PDC钻头水力学研究最新进展 . 石油钻采工艺, 2009, 31(5): 23-28.
[10]	张富成, 王卫忠, 扈东勇, 杨进, 谢科有, 吕方申. 苏里格气田丛式井钻井技术及应用 . 石油钻采工艺, 2009, 31(4): 36-39.
[11]	张汉林, 李季. PDC钻头在普光10井空气钻井中的应用 . 石油钻采工艺, 2007, 29(1): 25-27. doi: 10.3969/j.issn.1000-7393.2007.01.008
[12]	孙明光. 新型PDC钻头设计与现场试验 . 石油钻采工艺, 2006, 28(2): 21-24,27. doi: 10.3969/j.issn.1000-7393.2006.02.006
[13]	陈志学, 于文华, 朱敬祖, 张世清, 侯智广, 冯雪龙. 液动旋冲钻井技术在青西地区的试验与应用 . 石油钻采工艺, 2006, 28(5): 19-21. doi: 10.3969/j.issn.1000-7393.2006.05.007
[14]	徐林, 张东海, 邢子宾. 胡状地区小靶径多靶点定向井钻井技术 . 石油钻采工艺, 2003, 25(6): 17-19. doi: 10.3969/j.issn.1000-7393.2003.06.005
[15]	邹德永, 王瑞和, 岳志国. PDC钻头的轨迹方程及切削参数计算方法 . 石油钻采工艺, 2003, 25(5): 34-38. doi: 10.3969/j.issn.1000-7393.2003.05.009
[16]	唐继平, 仲文旭, 迟军, 魏凤奇. 塔里木山前复杂地层钻头使用技术 . 石油钻采工艺, 2003, 25(2): 39-43. doi: 10.3969/j.issn.1000-7393.2003.02.011
[17]	韩福彬, 刘修善. 新型PDC钻头的防斜打快效果及评价 . 石油钻采工艺, 2002, 24(4): 29-31. doi: 10.3969/j.issn.1000-7393.2002.04.010
[18]	于润桥, 刘春缘, 杨永利. PDC钻头钻进影响因素分析 . 石油钻采工艺, 2002, 24(2): 31-33. doi: 10.3969/j.issn.1000-7393.2002.02.010
[19]	周海涛, 周玉海. 应用PDC钻头钻进检测地层压力研究 . 石油钻采工艺, 1993, 15(2): 42-47. doi: 10.3969/j.issn.1000-7393.1993.02.008
[20]	王宁. PDC钻头钻井水力参数优选设计探讨 . 石油钻采工艺, 1991, 13(2): 15-20,24. doi: 10.3969/j.issn.1000-7393.1991.02.003

点击查看大图

计量

文章访问数: 3325
HTML全文浏览量: 23
PDF下载量: 413
被引次数: 0

旋冲钻井在塔河工区超深井段的应用

1. 中国石油化工股份有限公司石油工程技术研究院，北京　100101

2. 华东石油局钻井公司，江苏镇江　 212003

3. 中国石油天然气管道局天津设计院，天津　300457

收稿日期: 2019-05-18
修回日期: 2019-05-18
刊出日期: 2013-09-29

中图分类号: TE249

关键词:

旋冲钻井 /

射流冲击器 /

PDC钻头 /

超深井　　

摘要: 为提高新疆塔河工区深部地层机械钻速，在该区块试验应用了旋冲钻井技术。针对新疆塔河工区深部地层岩性特点和钻头选型情况，优选出旋冲钻井匹配钻头，优化并确定出射流冲击器结构性能参数。使用改进后射流冲击器首先在塔河工区S116-3井中配合PDC钻头在超深井段进行探索性应用，验证射流冲击器+PDC钻头的可行性，应用井深达6 086 m。随之，在TP324井进行了长井段现场应用，实现了液动射流冲击器与PDC钻头配合实质性应用。S116-3井应用井段：5 998.41~6 086 m，TP324井应用井段为6 151.65~6 912 m，总进尺847.94 m，总纯钻时间314.02，机械钻速同比提高32%~45%。S116-3、TP324井应用结果验证了该技术在深井超深井的提速效果及可靠性，为塔河工区深部地层探索了新的途径。

English Abstract

Application of rotary percussion drilling on the super deep section in Tahe Field

1. SINOPEC Petroleum Engineering and Technology Research Institute, Beijing 100101, China

2. Drilling Company, EastChina Petroleum Administration Bureau, Zhenjiang 212003, China

3. Tianjin Design Research Institute, CNPC Pipe Administration Bureau, Tanggu 300457, China

Received Date: 2019-05-18
Rev Recd Date: 2019-05-18
Publish Date: 2013-09-29

Keywords:

Abstract: To improve the Rate Of Penetration(ROP) for drilling deep formations in Tahe Field, rotary percussion drilling technique was tested. According to the lithologic features and drilling bit type selection in the region, the fixed bit was selected, and the structural properties of jet impactor were optimized and fixed. The improved jet impactor was firstly put into usage in the super deep section of Well S116-3, combined with PDC bit, proving the feasibility of jet impactor + PDC bit, and the depth reached 6 086 m. As following, it was field applied on Well TP324, which realized the real application of the combination of jet impactor and PDC bit. As a result, the application depth range of Well S116-3 was 5 998.41~6 086 m, and it was 6 151.65~6 912 m for Well TP324, so the total penetration was 848.16 m. The total net drilling period was 314.02, and the ROP was increased by 32%~45%. The application on the two wells proved the effect and reliability of the technique in deep and super deep wells. It supplied novel way to develop Tahe deep formation.

索忠伟, 王甲昌, 张海平, 李广国, 张仁龙, 敬辉阳. 旋冲钻井在塔河工区超深井段的应用[J]. 石油钻采工艺, 2013, 35(4): 44-47.

引用本文:

索忠伟, 王甲昌, 张海平, 李广国, 张仁龙, 敬辉阳. 旋冲钻井在塔河工区超深井段的应用[J]. 石油钻采工艺, 2013, 35(4): 44-47.

Citation:

全文HTML

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

通信地址: 河北省任丘市华北油田采油工程研究院邮政编码: 062552

电话: 0317-2723370, 2724207传真: 0317-2724207Email: syzc@vip.163.com

本系统由北京仁和汇智信息技术有限公司设计开发技术支持: info@rhhz.net

旋冲钻井在塔河工区超深井段的应用

Application of rotary percussion drilling on the super deep section in Tahe Field

计量

出版历程

旋冲钻井在塔河工区超深井段的应用

1. 中国石油化工股份有限公司石油工程技术研究院，北京 100101 2. 华东石油局钻井公司，江苏镇江 212003 3. 中国石油天然气管道局天津设计院，天津 300457

English Abstract

Application of rotary percussion drilling on the super deep section in Tahe Field

1. SINOPEC Petroleum Engineering and Technology Research Institute, Beijing 100101, China 2. Drilling Company, EastChina Petroleum Administration Bureau, Zhenjiang 212003, China 3. Tianjin Design Research Institute, CNPC Pipe Administration Bureau, Tanggu 300457, China

全文HTML

目录

1. 中国石油化工股份有限公司石油工程技术研究院，北京　100101

2. 华东石油局钻井公司，江苏镇江　 212003

3. 中国石油天然气管道局天津设计院，天津　300457

1. SINOPEC Petroleum Engineering and Technology Research Institute, Beijing 100101, China

2. Drilling Company, EastChina Petroleum Administration Bureau, Zhenjiang 212003, China

3. Tianjin Design Research Institute, CNPC Pipe Administration Bureau, Tanggu 300457, China