元坝超深含硫气井测试事故分析与预防措施

曹阳; 贾宝; 熊昕东; 乔治国

高级检索

E-mail Alert

元坝超深含硫气井测试事故分析与预防措施

曹阳, 贾宝, 熊昕东, 乔治国

文章导航 > 石油钻采工艺 > 2012 > 34(6): 49-52

曹阳, 贾宝, 熊昕东, 乔治国. 元坝超深含硫气井测试事故分析与预防措施[J]. 石油钻采工艺, 2012, 34(6): 49-52.

引用本文:

曹阳, 贾宝, 熊昕东, 乔治国. 元坝超深含硫气井测试事故分析与预防措施[J]. 石油钻采工艺, 2012, 34(6): 49-52.

CAO Yang, JIA Bao, XIONG Xindong, QIAO Zhiguo. Testing accident analysis and preventive measures for ultra-deep sulfur-bearing gas wells in Yuanba Gas Field[J]. Oil Drilling & Production Technology, 2012, 34(6): 49-52.

Citation:

CAO Yang, JIA Bao, XIONG Xindong, QIAO Zhiguo. Testing accident analysis and preventive measures for ultra-deep sulfur-bearing gas wells in Yuanba Gas Field[J]. Oil Drilling & Production Technology, 2012, 34(6): 49-52.

元坝超深含硫气井测试事故分析与预防措施

1.
中国石化西南油气分公司工程技术研究院，四川德阳　618000
2.
中国石化西南石油局井下作业公司，四川德阳　618000

详细信息

中图分类号: TE353

Testing accident analysis and preventive measures for ultra-deep sulfur-bearing gas wells in Yuanba Gas Field

1.
Engineering Technology Institute of Sinopec Southwest Oil &
2.
Gas Company, Deyang 618000, China

摘要: 元坝气田长兴组气藏埋深7 000 m左右，井底温度高达157 ℃，作业工况及井下条件复杂，测试难度大、风险高，测试时面临管柱埋卡、脱落、工具失效等问题。针对现场大量事故案例，在理论分析和现场试验基础上研究出各类事故相应的预防措施。压井工艺由直接压井改为循环隔离液后再压井，并对钻井液进行优化，解决了钻井液分相、沉淀等问题，降低了管柱埋卡事故率；优化施工水力参数，消除了工具被刺蚀风险；对RTTS封隔器中心管和水力锚锚爪进行改进，避免了封隔器中心管断裂，同时提高了封隔器坐封稳定性；合理控制油管入井次数减少了油管脱落风险。以上措施在YB205等10余口井中成功应用，有效降低了元坝气田测试事故率，为同类井作业提供借鉴。
- 超深气井 /
- 硫化氢 /
- 测试 /
- 事故分析 /
- 预防措施
Abstract: With a burial depth of approximate 7 000 m, and as high as 157 ℃of downhole temperature, the gas reservoir in Changxing Formation in Yuanba gas field is of complex working condition and downhole geological condition, so the testing is hard to carry out, where high risks such as string being buried, stuck or falling off and malfunction of tools may occur. Based on theory analysis and field test, corresponding preventive measures for various accidents have been made by means of analyzing a large number of onsite accident cases. Well kill was enabled after seal liquid circulation in stead of traditional direct well kill; furthermore, the drilling fluid was optimized. In this way, drilling fluid parvafacies and precipitation and other problems were solved, and the string was less likely to be buried and stuck; construction hydraulic parameters were optimized to eliminate the risk that tools might be punctured or corroded; RTTS packer central tube and hydraulic anchor jaws were improved to avoid the fracture of packer central tube while improving the stability of packer setting; the reasonable control of the frequency of oil tube running reduced the risk of oil tube falling off. The above measures have been successfully applied in over 10 wells including well YB205, which effectively reduced accident rate in Yuanba gas field testing. They can be used as reference in well operation of the same kind. 　　
- ultra-deep gas well /
- hydrogen sulfide /
- testing /
- accident analysis /
- preventive measures

[1]	房超, 张辉, 陈朝伟, 陈业生, 冯永存, 林子力, 范进朝, 翟文宝, 刘恩博. 地质工程一体化漏失机理与预防措施 . 石油钻采工艺, 2022, 44(6): 1-9.
[2]	黄熠, 杨进, 王尔钧, 张祯祥, 方达科, 魏安超. 南海超高温高压气井裸眼完井测试关键技术 . 石油钻采工艺, 2020, 42(2): 150-155. doi: 10.13639/j.odpt.2020.02.005
[3]	张兴华, 周宝锁, 施洋, 余涵, 王允海. 海上高产气井测试油气处理工艺 . 石油钻采工艺, 2018, 40(S1): 161-163. doi: 10.13639/j.odpt.2018.S0.045
[4]	练章华, 牟易升, 张强, 施太和, 罗泽利. 超深气井油管气密封检测应力分析及防控措 . 石油钻采工艺, 2018, 40(3): 324-329. doi: 10.13639/j.odpt.2018.03.009
[5]	林元华, 潘杰, 刘婉颖, 王其军, 潘勇, 王书. 硫化氢环境下G-105 和S-135 钻杆的低载多冲疲劳性能测试 . 石油钻采工艺, 2016, 38(1): 59-63. doi: 10.13639/j.odpt.2016.01.013
[6]	覃毅. 内插法固井工具失效典型案例及预防措施 . 石油钻采工艺, 2015, 37(6): 114-116. doi: 10.13639/j.odpt.2015.06.029
[7]	郭小哲, 王福升, 赵志辉, 胡广文, 王金礼. 准噶尔盆地气井天然气水合物生成实验研究与分析 . 石油钻采工艺, 2013, 35(5): 118-120.
[8]	李建周, 高永海, 郑清华, 孙宝江, 关利军. 深水气井测试过程水合物形成预测 . 石油钻采工艺, 2012, 34(4): 77-80.
[9]	任源峰, 宋辉. 泵注法除硫装置在含硫气井试气过程中的应用 . 石油钻采工艺, 2011, 33(2): 133-136.
[10]	毛志新, 杨峰, 鲜保安. 保德区块煤层气定向井黏附卡钻的分析与预防 . 石油钻采工艺, 2011, 33(3): 91-93.
[11]	李兆敏, 王登庆, 张志宏, 张星, 董斌. 深井硫化氢腐蚀规律试验研究 . 石油钻采工艺, 2008, 30(3): 79-82.
[12]	陈论韬, 孙思平, 杨安虎, 何志龙. 温米油田套管损坏原因分析及预防措施 . 石油钻采工艺, 2008, 30(2): 118-121.
[13]	董尚富. 射孔-测试-酸化联作工艺应用与分析 . 石油钻采工艺, 2004, 26(3): 72-74. doi: 10.3969/j.issn.1000-7393.2004.03.022
[14]	潘凤岭, 刘东勤, 田秋月, 汝大军. 赵芯2井封堵硫化氢作业技术 . 石油钻采工艺, 2003, 25(1): 33-35. doi: 10.3969/j.issn.1000-7393.2003.01.010
[15]	李俊波, 赵胜英. 陕北富县探区钻具失效分析和预防措施 . 石油钻采工艺, 2002, 24(6): 26-29. doi: 10.3969/j.issn.1000-7393.2002.06.010
[16]	李树群, 孙先杰, 赵丽娟. 大庆龙虎泡高台子区块套损原因分析及对策 . 石油钻采工艺, 2001, 23(6): 62-65,84. doi: 10.3969/j.issn.1000-7393.2001.06.018
[17]	肖兵, 范步霄, 齐政学, 赵年合, 王杏尊. 生产井站多参数地面测试技术研究与应用 . 石油钻采工艺, 2000, 22(6): 72-74. doi: 10.3969/j.issn.1000-7393.2000.06.022
[18]	崔金榜, 王燕嵩, 张胜利, 田伟, 胡雄心. 螺杆泵工况测试技术研究 . 石油钻采工艺, 1999, 21(6): 86-89. doi: 10.3969/j.issn.1000-7393.1999.06.019
[19]	刘占广. 卡瓦式封隔器在井下的受力分析 . 石油钻采工艺, 1994, 16(5): 53-59. doi: 10.3969/j.issn.1000-7393.1994.05.014
[20]	陈赓良. 含硫气井的硫沉积及其解决途径 . 石油钻采工艺, 1990, 12(5): 73-79. doi: 10.3969/j.issn.1000-7393.1990.05.011

点击查看大图

计量

文章访问数: 2903
HTML全文浏览量: 37
PDF下载量: 346
被引次数: 0

元坝超深含硫气井测试事故分析与预防措施

1. 中国石化西南油气分公司工程技术研究院，四川德阳　618000

2. 中国石化西南石油局井下作业公司，四川德阳　618000

收稿日期: 2019-05-21
修回日期: 2019-05-21
刊出日期: 2013-01-21

中图分类号: TE353

关键词:

超深气井 /

硫化氢 /

测试 /

事故分析 /

预防措施

摘要: 元坝气田长兴组气藏埋深7 000 m左右，井底温度高达157 ℃，作业工况及井下条件复杂，测试难度大、风险高，测试时面临管柱埋卡、脱落、工具失效等问题。针对现场大量事故案例，在理论分析和现场试验基础上研究出各类事故相应的预防措施。压井工艺由直接压井改为循环隔离液后再压井，并对钻井液进行优化，解决了钻井液分相、沉淀等问题，降低了管柱埋卡事故率；优化施工水力参数，消除了工具被刺蚀风险；对RTTS封隔器中心管和水力锚锚爪进行改进，避免了封隔器中心管断裂，同时提高了封隔器坐封稳定性；合理控制油管入井次数减少了油管脱落风险。以上措施在YB205等10余口井中成功应用，有效降低了元坝气田测试事故率，为同类井作业提供借鉴。

English Abstract

Testing accident analysis and preventive measures for ultra-deep sulfur-bearing gas wells in Yuanba Gas Field

1. Engineering Technology Institute of Sinopec Southwest Oil &

2. Gas Company, Deyang 618000, China

Received Date: 2019-05-21
Rev Recd Date: 2019-05-21
Publish Date: 2013-01-21

Keywords:

Abstract: With a burial depth of approximate 7 000 m, and as high as 157 ℃of downhole temperature, the gas reservoir in Changxing Formation in Yuanba gas field is of complex working condition and downhole geological condition, so the testing is hard to carry out, where high risks such as string being buried, stuck or falling off and malfunction of tools may occur. Based on theory analysis and field test, corresponding preventive measures for various accidents have been made by means of analyzing a large number of onsite accident cases. Well kill was enabled after seal liquid circulation in stead of traditional direct well kill; furthermore, the drilling fluid was optimized. In this way, drilling fluid parvafacies and precipitation and other problems were solved, and the string was less likely to be buried and stuck; construction hydraulic parameters were optimized to eliminate the risk that tools might be punctured or corroded; RTTS packer central tube and hydraulic anchor jaws were improved to avoid the fracture of packer central tube while improving the stability of packer setting; the reasonable control of the frequency of oil tube running reduced the risk of oil tube falling off. The above measures have been successfully applied in over 10 wells including well YB205, which effectively reduced accident rate in Yuanba gas field testing. They can be used as reference in well operation of the same kind. 　　

曹阳, 贾宝, 熊昕东, 乔治国. 元坝超深含硫气井测试事故分析与预防措施[J]. 石油钻采工艺, 2012, 34(6): 49-52.

引用本文:

曹阳, 贾宝, 熊昕东, 乔治国. 元坝超深含硫气井测试事故分析与预防措施[J]. 石油钻采工艺, 2012, 34(6): 49-52.

Citation: