一种新的射孔负压设计方法

李拥军; 黄继红; 刘健; 熊友明; 许彬; 徐家年; 刘冬冬

高级检索

E-mail Alert

一种新的射孔负压设计方法

李拥军, 黄继红, 刘健, 熊友明, 许彬, 徐家年, 刘冬冬

文章导航 > 石油钻采工艺 > 2010 > 32(2): 118-121

李拥军, 黄继红, 刘健, 熊友明, 许彬, 徐家年, 刘冬冬. 一种新的射孔负压设计方法[J]. 石油钻采工艺, 2010, 32(2): 118-121.

引用本文:

李拥军, 黄继红, 刘健, 熊友明, 许彬, 徐家年, 刘冬冬. 一种新的射孔负压设计方法[J]. 石油钻采工艺, 2010, 32(2): 118-121.

LI Yongjun, HUANG Jihong, LIU Jian, XIONG Youming, XU Bin, XU Jianian, LIU Dongdong. Research and application of a new method of under-balanced perforating pressure design[J]. Oil Drilling & Production Technology, 2010, 32(2): 118-121.

Citation:

LI Yongjun, HUANG Jihong, LIU Jian, XIONG Youming, XU Bin, XU Jianian, LIU Dongdong. Research and application of a new method of under-balanced perforating pressure design[J]. Oil Drilling & Production Technology, 2010, 32(2): 118-121.

一种新的射孔负压设计方法

1.
新疆油田公司采油一厂，新疆克拉玛依　834000
2.
西南石油大学，四川成都　610500

详细信息

中图分类号: TE257+.1

Research and application of a new method of under-balanced perforating pressure design

1.
Xinjiang Oilfield of China Petroleum Corporation Oil Production Factory 1st, Kelamay 834000, China
2.
Southwest Petroleum University, Chengdu 610500, China

摘要: 随着负压射孔工艺的不断发展和进步，出现了很多射孔负压值的设计方法。常规射孔负压设计方法考虑因素单一，不同的负压设计方法设计的负压值差距较大，给现场应用带来诸多不便。为此，在对比分析常规射孔负压设计方法优缺点基础上，综合考虑地层渗透率、孔隙度、岩石力学参数、油田区块有无出砂史、套管安全压力、射孔孔眼的力学稳定性等因素，提出了一种新的射孔负压设计方法。新方法考虑的安全因素更全面，在新疆采油一厂应用后效果显著，8口试验井射孔后，均可自喷投产，且产能较高。新的射孔负压设计方法对油田的高效、安全开发具有重要的理论和现实意义。
- 射孔 /
- 负压值设计 /
- 软件 /
- 新疆油田
Abstract: With the development and progress of the underbalanced perforating technology, some different underbalanced pressure design methods have been developed. However, the factors that conventional method has taken into consideration are relatively simple, so the results vary a lot with different methods, resulting in great inconvenience to field application. So on the basis of considering the adventages and disadvantages of conventional methods, a new method taking many factors into account, such as reservoir permeability, porosity, rock mechanics parameter, sanding history, safe casing pressure, rock mechanic stability of bullet hole , etc. The new method takes safety factors into account more thoroughly as compared to the conventional one. It has been applied to the No.1 Oil Production Factory of Xinjiang Oilfield Company and remarkable effect has been achieved. After perforation in 8 wells, these wells all can perform as flow production naturally, attending higher productivity. All of these indicate that the new method of has certain practicability.
- perforating /
- underbalanced pressure design /
- software /
- Xinjiang Oilfield

[1]

［1］万仁溥，熊友明.现代完井工程［M］. 3版.北京：石油工业出版社，2008-06：293-326.
WAN Renpu, XIONG Youming. Advanced well completion engineering［M］. 3th edition. Beijing: Petroleum Industry Press, 2008-06: 293-326.
［2］BEHRMANN L A. Underbalance criteria for minimum perforation damage［J］. SPE DC，1996,11（3）: 173-177.
［3］HANDREN P J, JUPP T B, DEES J M. Underbalance perforating and stimulation methods for wells［R］. SPE 26515, 1993.
［4］KING G E, ANDERSON A, BINGHAM M A. Field study of underbalance pressures necessary to obtain clean perforations using tubing-conveyed perforating［R］. SPE 14321, 1986.
［5］TARIQ S M. New, generalized criteria for determining the level of underbalance for obtaining clean perforations ［R］. SPE 20636, 1990.

[1]	崔璐, 黄少璞, 康文泉, 窦益华, 王治国, 冉亚楠. 射孔工况下多喷嘴水力喷射工具冲蚀研究 . 石油钻采工艺, 2018, 40(5): 620-625. doi: 10.13639/j.odpt.2018.05.014
[2]	仝少凯, 王祖文, 杨小平, 王伟, 岳艳芳, 骆裕明. 水力喷砂定点射孔力学机理 . 石油钻采工艺, 2017, 39(3): 293-297, 302. doi: 10.13639/j.odpt.2017.03.007
[3]	杨文明, 昌伦杰, 朱轶, 高春海, 罗慎超. 哈拉哈塘油田生产井井壁垮塌原因分析 . 石油钻采工艺, 2017, 39(4): 424-428. doi: 10.13639/j.odpt.2017.04.006
[4]	李甫, 梁爱国, 廖先燕, 黄玲, 帕提古丽, 亚尔买买提. 新疆稠油油藏复合吞吐技术研究与应用　　 . 石油钻采工艺, 2013, 35(6): 87-91.
[5]	李昌盛, 赵金海, 杨传书, 张弛, 徐术国. 钻头工作效率实时评估新方法 . 石油钻采工艺, 2012, 34(6): 1-4.
[6]	何汉平, 吴俊霞, 黄健林, 田璐. 伊朗雅达油田完井工艺 . 石油钻采工艺, 2012, 34(4): 26-30.
[7]	李敬元, 李子丰, 李天降, 王长进, 李桂芳, 朱红莉. 井下作业管柱力学分析软件及应用 . 石油钻采工艺, 2008, 30(5): 118-121.
[8]	穆海朋, 步玉环, 姜林甫, 魏绪伟, 温盛魁. 固井纤维水泥射孔实验研究 . 石油钻采工艺, 2007, 29(4): 28-31. doi: 10.3969/j.issn.1000-7393.2007.04.008
[9]	左锋, 毕胜宇, 阎久军. 射孔优化技术在涠洲油田的应用 . 石油钻采工艺, 2007, 29(6): 24-27. doi: 10.3969/j.issn.1000-7393.2007.06.009
[10]	李根生, 熊伟, 宋剑, 黄中伟, 牛继磊. 高压水射流深穿透射孔产能影响因素 . 石油钻采工艺, 2006, 28(4): 60-63. doi: 10.3969/j.issn.1000-7393.2006.04.019
[11]	董尚富. 射孔-测试-酸化联作工艺应用与分析 . 石油钻采工艺, 2004, 26(3): 72-74. doi: 10.3969/j.issn.1000-7393.2004.03.022
[12]	范白涛, 邓建明. 海上油田完井技术和理念 . 石油钻采工艺, 2004, 26(3): 23-26. doi: 10.3969/j.issn.1000-7393.2004.03.007
[13]	施木喜, 雷雨田, 李家明, 王玉松, 吴荷香, 周堤. 斜井射孔工艺研究与应用 . 石油钻采工艺, 2003, 25(4): 76-78. doi: 10.3969/j.issn.1000-7393.2003.04.025
[14]	田和金, 薛中天, 李璗, 张杰. 高能气体压裂联作技术进展 . 石油钻采工艺, 2002, 24(4): 67-69. doi: 10.3969/j.issn.1000-7393.2002.04.023
[15]	许广明, 孔祥言, 卢德唐. 利用非稳定渗流方程研究射孔参数对产能的影响 . 石油钻采工艺, 2000, 22(4): 42-45. doi: 10.3969/j.issn.1000-7393.2000.04.013
[16]	张士诚, 王世贵, 张国良, 张有才, 董建华. 限流法压裂射孔方案优化设计 . 石油钻采工艺, 2000, 22(2): 60-63. doi: 10.3969/j.issn.1000-7393.2000.02.017
[17]	赵新红, 张以明, 吕传炳, 曹云安, 夏克文, 刘明利. 三相流高能复合射孔压裂技术现场应用 . 石油钻采工艺, 1999, 21(6): 68-72. doi: 10.3969/j.issn.1000-7393.1999.06.015
[18]	周生田, 张琪, 李明忠, 薛建泉. 射孔水平管阻力系数的试验研究 . 石油钻采工艺, 1998, 20(5): 52-55. doi: 10.3969/j.issn.1000-7393.1998.05.010
[19]	李海涛, 王永清. 确定油井射孔最大负压的新方法研究 . 石油钻采工艺, 1997, 19(4): 64-69. doi: 10.3969/j.issn.1000-7393.1997.04.013
[20]	潘迎德. 应大力提倡高孔密射孔完井 . 石油钻采工艺, 1994, 16(1): 51-59. doi: 10.3969/j.issn.1000-7393.1994.01.010

点击查看大图

计量

文章访问数: 2726
HTML全文浏览量: 25
PDF下载量: 26
被引次数: 0

一种新的射孔负压设计方法

1. 新疆油田公司采油一厂，新疆克拉玛依　834000

2. 西南石油大学，四川成都　610500

收稿日期: 2019-05-07
修回日期: 2019-05-07
刊出日期: 2010-05-04

中图分类号: TE257+.1

关键词:

射孔 /

负压值设计 /

软件 /

新疆油田

摘要: 随着负压射孔工艺的不断发展和进步，出现了很多射孔负压值的设计方法。常规射孔负压设计方法考虑因素单一，不同的负压设计方法设计的负压值差距较大，给现场应用带来诸多不便。为此，在对比分析常规射孔负压设计方法优缺点基础上，综合考虑地层渗透率、孔隙度、岩石力学参数、油田区块有无出砂史、套管安全压力、射孔孔眼的力学稳定性等因素，提出了一种新的射孔负压设计方法。新方法考虑的安全因素更全面，在新疆采油一厂应用后效果显著，8口试验井射孔后，均可自喷投产，且产能较高。新的射孔负压设计方法对油田的高效、安全开发具有重要的理论和现实意义。

English Abstract

Research and application of a new method of under-balanced perforating pressure design

1. Xinjiang Oilfield of China Petroleum Corporation Oil Production Factory 1st, Kelamay 834000, China

2. Southwest Petroleum University, Chengdu 610500, China

Received Date: 2019-05-07
Rev Recd Date: 2019-05-07
Publish Date: 2010-05-04

Keywords:

Abstract: With the development and progress of the underbalanced perforating technology, some different underbalanced pressure design methods have been developed. However, the factors that conventional method has taken into consideration are relatively simple, so the results vary a lot with different methods, resulting in great inconvenience to field application. So on the basis of considering the adventages and disadvantages of conventional methods, a new method taking many factors into account, such as reservoir permeability, porosity, rock mechanics parameter, sanding history, safe casing pressure, rock mechanic stability of bullet hole , etc. The new method takes safety factors into account more thoroughly as compared to the conventional one. It has been applied to the No.1 Oil Production Factory of Xinjiang Oilfield Company and remarkable effect has been achieved. After perforation in 8 wells, these wells all can perform as flow production naturally, attending higher productivity. All of these indicate that the new method of has certain practicability.

李拥军, 黄继红, 刘健, 熊友明, 许彬, 徐家年, 刘冬冬. 一种新的射孔负压设计方法[J]. 石油钻采工艺, 2010, 32(2): 118-121.

引用本文:

李拥军, 黄继红, 刘健, 熊友明, 许彬, 徐家年, 刘冬冬. 一种新的射孔负压设计方法[J]. 石油钻采工艺, 2010, 32(2): 118-121.

Citation:

LI Yongjun, HUANG Jihong, LIU Jian, XIONG Youming, XU Bin, XU Jianian, LIU Dongdong. Research and application of a new method of under-balanced perforating pressure design[J]. Oil Drilling & Production Technology, 2010, 32(2): 118-121.

全文HTML

参考文献 (1)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

通信地址: 河北省任丘市华北油田采油工程研究院邮政编码: 062552

电话: 0317-2723370, 2724207传真: 0317-2724207Email: syzc@vip.163.com

本系统由北京仁和汇智信息技术有限公司设计开发技术支持: info@rhhz.net

一种新的射孔负压设计方法

Research and application of a new method of under-balanced perforating pressure design

计量

出版历程

一种新的射孔负压设计方法

1. 新疆油田公司采油一厂，新疆克拉玛依 834000 2. 西南石油大学，四川成都 610500

English Abstract

Research and application of a new method of under-balanced perforating pressure design

1. Xinjiang Oilfield of China Petroleum Corporation Oil Production Factory 1st, Kelamay 834000, China 2. Southwest Petroleum University, Chengdu 610500, China

全文HTML

目录

1. 新疆油田公司采油一厂，新疆克拉玛依　834000

2. 西南石油大学，四川成都　610500

1. Xinjiang Oilfield of China Petroleum Corporation Oil Production Factory 1st, Kelamay 834000, China

2. Southwest Petroleum University, Chengdu 610500, China