割缝筛管防腐与防垢技术研究

刘大红; 李春福; 刘先明; 刘艳红

高级检索

E-mail Alert

割缝筛管防腐与防垢技术研究

刘大红, 李春福, 刘先明, 刘艳红

文章导航 > 石油钻采工艺 > 2009 > 31(3): 123-126

刘大红, 李春福, 刘先明, 刘艳红. 割缝筛管防腐与防垢技术研究[J]. 石油钻采工艺, 2009, 31(3): 123-126.

引用本文:

刘大红, 李春福, 刘先明, 刘艳红. 割缝筛管防腐与防垢技术研究[J]. 石油钻采工艺, 2009, 31(3): 123-126.

LIU Dahong, LI Chunfu, LIU Xianming, LIU Yanhong. Research on slotted screen for anticorrosion and antiscale in oil/water wells[J]. Oil Drilling & Production Technology, 2009, 31(3): 123-126.

Citation:

LIU Dahong, LI Chunfu, LIU Xianming, LIU Yanhong. Research on slotted screen for anticorrosion and antiscale in oil/water wells[J]. Oil Drilling & Production Technology, 2009, 31(3): 123-126.

割缝筛管防腐与防垢技术研究

1.
清华大学水利水电工程系，北京　100084
2.
大港油田集团钻采工艺研究院，天津　300280
3.
西南石油大学材料科学与工程学院，四川成都　610500
4.
大港油田公司赵东区块项目部，天津　300280

详细信息

中图分类号: TE938

Research on slotted screen for anticorrosion and antiscale in oil/water wells

1.
Department of Hydraulic Engineering, Tsinghua University, Beijing 100084, China
2.
Drilling and Production Institute, Dagang Oilfield Group, Tianjin 300280, China
3.
College of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500, China
4.
Project Department of Zhaodong Offshore Oil Area, Dagang Oilfield Company, Tianjin 300280, China

摘要: 开采油、气、水资源，要求割缝筛管同时具备防砂、防腐和防垢的性能。介绍了一种具有防砂、防腐和防垢性能的割缝筛管及其加工方法。通过对相同材质、不同加工方法制成的两种割缝筛管试件的室内对比试验，证实了使用高含硼特殊刀具磨削加工的割缝筛管缝隙表面具有很好的防腐和防垢性能。对割缝筛管试件的X光电子能谱分析和扫描电镜观察分析，证实了这种筛管缝隙表面有Fe2B和FeB的存在。分析和阐述了该筛管的防腐和防垢机理、加工方法和设计依据，并根据割缝筛管的结构特点和工况，定义了割缝筛管的防腐、防垢性能与套管（油管）的材质匹配关系等。
- 割缝筛管 /
- 防砂 /
- 防腐 /
- 防垢 /
- 机理 /
- 立方氮化硼
Abstract: As a slotted screen is employed in sand control in oil /water wells, its anticorrosion effect and antiscale effect are supposed to improve the production of oil and water. This paper introduces a special slotted screen of anticorrosion characteristic and antiscale characteristic in sand control in oil /water wells, and their acting mechanism. By conducting comparative test on two types of slotted screen samples made of the same materials but different processing methods in the lab, it is proved that CBN ceramic cutting method may improve the anticorrosion and antiscale properties of the slotted screen by boronising the surface during cutting. X-ray photoelectron spectroscopy analysis and scanning electron microscopy analysis show that there are Fe2B and FeB on the screen surface. In additions, the anticorrosion and antiscale mechanisms, processing methods, and design principles are discussed in this paper. The definition of the material matching between the anticorrosion and antiscale properties of slotted screen and casing (tubing) is given, according to the structural characteristics and working conditions of slotted screen.
- slotted screen /
- sand control /
- anticorrosion /
- antiscale /
- mechanism /
- cubic boron nitrogen

[1]

［1］戴勇. CBN砂轮磨削机理及应用技术研究［D］.哈尔滨工业大学，1988.
DAI Yong. The mechanism of surface grinding with a CBN wheel and its application［D］. Doctor’s dissertation of Harbin Institute of Technology, 1988.
［2］刘大红，宋秀英，刘艳红，等. 割缝筛管防砂设计及应用［J］.石油机械，2004，32（8）：13-16.
LIU Dahong, SONG Xiuying, LIU Yanhong, et a1. Slotted screen design and its application to oil/water wells in sand control［J］. China Petroleum Machinery, 2004, 32（8）: 13-16.

[1]	董长银, 陈琛, 周博, 隋义勇, 王兴, 王金忠. 油气藏型储气库出砂机理及防砂技术现状与发展趋势展望 . 石油钻采工艺, 2022, 44(1): 43-55. doi: 10.13639/j.odpt.2022.01.008
[2]	黄勇, 董长银, 周玉刚, 游红娟, 刘亚宾, 王卓飞. 基于渗透率损失规律分析的稠油井割缝筛管割缝宽度优化 . 石油钻采工艺, 2021, 43(1): 116-122. doi: 10.13639/j.odpt.2021.01.018
[3]	张俊斌, 张庆华, 张译, 魏裕森, 楼一珊, 高斐. 疏松砂岩油藏水平井防砂筛管优选和防砂精度优化 . 石油钻采工艺, 2018, 40(6): 811-817. doi: 10.13639/j.odpt.2018.06.022
[4]	武广瑷, 曹砚锋, 史东坡. 西非深水A 油田防砂实践 . 石油钻采工艺, 2015, 37(1): 121-123. doi: 10.13639/j.odpt.2015.01.031
[5]	李彦龙, 董长银, 李怀文, 邵力飞, 陈新安, 许拓拓. 降水防砂工艺措施效果评价模型研究 . 石油钻采工艺, 2014, 36(5): 113-116. doi: 10.13639/j.odpt.2014.05.028
[6]	周晓君, 韩延峰, 韩新德. 防砂充填颗粒对地层的作用机理研究 . 石油钻采工艺, 2007, 29(4): 55-58. doi: 10.3969/j.issn.1000-7393.2007.04.016
[7]	荣莽, 姚菊莲. 机械双重防砂技术研究 . 石油钻采工艺, 2005, 27(1): 61-63. doi: 10.3969/j.issn.1000-7393.2005.01.019
[8]	董长银, 李志芬, 张琪, 李长印. 防砂井产能评价及预测方法 . 石油钻采工艺, 2002, 24(6): 45-48. doi: 10.3969/j.issn.1000-7393.2002.06.017
[9]	栾林明, 马涛耿, 鲁营, 张连碧, 高志斌, 孙秀华. 用JHS-3胶合砂防粉细砂 . 石油钻采工艺, 2002, 24(6): 61-63. doi: 10.3969/j.issn.1000-7393.2002.06.021
[10]	杨彪, 于永, 李爱山. CO2驱对油藏的伤害及其保护措施 . 石油钻采工艺, 2002, 24(4): 42-44. doi: 10.3969/j.issn.1000-7393.2002.04.015
[11]	李占军, 杨芳, 柴会理, 黄瑞平, 朱士武. 官195断块出砂机理与防砂技术 . 石油钻采工艺, 2002, 24(6): 64-65. doi: 10.3969/j.issn.1000-7393.2002.06.022
[12]	李景全, 赵群, 刘华军. 河南油田江河区油井防垢技术 . 石油钻采工艺, 2002, 24(2): 57-60. doi: 10.3969/j.issn.1000-7393.2002.02.019
[13]	林志彬, 吴柏志, 杜勇. 酸洗防砂技术的研究与应用 . 石油钻采工艺, 2001, 23(1): 74-76,86. doi: 10.3969/j.issn.1000-7393.2001.01.023
[14]	李小林, 吕学忠, 刘中云, 孙明修, 张龙. 改性玻璃钢内衬油管的试验与应用 . 石油钻采工艺, 2001, 23(2): 76-78,86. doi: 10.3969/j.issn.1000-7393.2001.02.024
[15]	景瑞林, 尹强, 田宝国, 孔令旭. 割缝筛管防砂技术研究 . 石油钻采工艺, 2001, 23(2): 72-75,86. doi: 10.3969/j.issn.1000-7393.2001.02.023
[16]	方立新, 沃凤林, 崔建邦, 白凤华, 马汉忠. 复合陶粒防砂技术研究与实践 . 石油钻采工艺, 1999, 21(1): 75-78. doi: 10.3969/j.issn.1000-7393.1999.01.018
[17]	王德新, 吕从容. 油井中后期出砂预测及防砂对策 . 石油钻采工艺, 1997, 19(3): 81-84. doi: 10.3969/j.issn.1000-7393.1997.03.018
[18]	李文印, 郝长生, 曹兴东, 孙文涛, 张惠恩, 马会仁. 对注水井油管防腐机理的分析与探讨 . 石油钻采工艺, 1994, 16(3): 93-97. doi: 10.3969/j.issn.1000-7393.1994.03.019
[19]	胡才志. 有机硅树脂防砂剂的研制及应用 . 石油钻采工艺, 1992, 14(3): 60-68. doi: 10.3969/j.issn.1000-7393.1992.03.012
[20]	李延美, 张振清. 港西明1流砂层综合防砂新方法 . 石油钻采工艺, 1989, 11(2): 101-104,92. doi: 10.3969/j.issn.1000-7393.1989.02.015

点击查看大图

计量

文章访问数: 3736
HTML全文浏览量: 22
PDF下载量: 52
被引次数: 0

割缝筛管防腐与防垢技术研究

1. 清华大学水利水电工程系，北京　100084

2. 大港油田集团钻采工艺研究院，天津　300280

3. 西南石油大学材料科学与工程学院，四川成都　610500

4. 大港油田公司赵东区块项目部，天津　300280

收稿日期: 2019-04-02
修回日期: 2019-04-02
刊出日期: 2009-07-02

中图分类号: TE938

关键词:

割缝筛管 /

防砂 /

防腐 /

防垢 /

机理 /

立方氮化硼

摘要: 开采油、气、水资源，要求割缝筛管同时具备防砂、防腐和防垢的性能。介绍了一种具有防砂、防腐和防垢性能的割缝筛管及其加工方法。通过对相同材质、不同加工方法制成的两种割缝筛管试件的室内对比试验，证实了使用高含硼特殊刀具磨削加工的割缝筛管缝隙表面具有很好的防腐和防垢性能。对割缝筛管试件的X光电子能谱分析和扫描电镜观察分析，证实了这种筛管缝隙表面有Fe2B和FeB的存在。分析和阐述了该筛管的防腐和防垢机理、加工方法和设计依据，并根据割缝筛管的结构特点和工况，定义了割缝筛管的防腐、防垢性能与套管（油管）的材质匹配关系等。

English Abstract

Research on slotted screen for anticorrosion and antiscale in oil/water wells

1. Department of Hydraulic Engineering, Tsinghua University, Beijing 100084, China

2. Drilling and Production Institute, Dagang Oilfield Group, Tianjin 300280, China

3. College of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500, China

4. Project Department of Zhaodong Offshore Oil Area, Dagang Oilfield Company, Tianjin 300280, China

Received Date: 2019-04-02
Rev Recd Date: 2019-04-02
Publish Date: 2009-07-02

Keywords:

Abstract: As a slotted screen is employed in sand control in oil /water wells, its anticorrosion effect and antiscale effect are supposed to improve the production of oil and water. This paper introduces a special slotted screen of anticorrosion characteristic and antiscale characteristic in sand control in oil /water wells, and their acting mechanism. By conducting comparative test on two types of slotted screen samples made of the same materials but different processing methods in the lab, it is proved that CBN ceramic cutting method may improve the anticorrosion and antiscale properties of the slotted screen by boronising the surface during cutting. X-ray photoelectron spectroscopy analysis and scanning electron microscopy analysis show that there are Fe2B and FeB on the screen surface. In additions, the anticorrosion and antiscale mechanisms, processing methods, and design principles are discussed in this paper. The definition of the material matching between the anticorrosion and antiscale properties of slotted screen and casing (tubing) is given, according to the structural characteristics and working conditions of slotted screen.

刘大红, 李春福, 刘先明, 刘艳红. 割缝筛管防腐与防垢技术研究[J]. 石油钻采工艺, 2009, 31(3): 123-126.

引用本文:

刘大红, 李春福, 刘先明, 刘艳红. 割缝筛管防腐与防垢技术研究[J]. 石油钻采工艺, 2009, 31(3): 123-126.

LIU Dahong, LI Chunfu, LIU Xianming, LIU Yanhong. Research on slotted screen for anticorrosion and antiscale in oil/water wells[J]. Oil Drilling & Production Technology, 2009, 31(3): 123-126.

Citation:

LIU Dahong, LI Chunfu, LIU Xianming, LIU Yanhong. Research on slotted screen for anticorrosion and antiscale in oil/water wells[J]. Oil Drilling & Production Technology, 2009, 31(3): 123-126.